INSTALLATION OF FIRE BOWLS
REQUIRE
MOUNTING HARDWARE
Mounting Hardware is Required for All Fire Bowl Installation to Validate
Warranty and Insure Safety
Mounting Hardware for Fire Bowls
With Feet
The GFRC Vessel must be secured to concrete paving or pilaster using supplied Anchor Bolts as shown below on Figure 1.
Place the bolts through pre-drilled holes in GFRC Vessel and secure to mounting surface. Do not seal or block ventilation at the base of GFRC Vessel.
Warranty is voided if the required mounting hardware is not installed or ventilation is blocked.
Printable PDF
Mounting Bracket and Hardware for Fire Bowls
Without Feet
Figure 1 – Secure Mounting Bracket to concrete paving or pilaster using supplied Anchor Bolts.
Figure 2 – Place the GFRC Vessel over the Mounting Bracket with the all thread posts coming through the center hole of the GFRC Vessel.
Place the Retaining Ring over the all thread posts inside GFRC Vessel and Secure with Washers and Fasteners.
Do not seal open space between Mounting Bracket and Vessel. Warranty is voided if the required Mounting Bracket is not installed.
Printable PDF
